BMF 13T1 Pro

Single-beam trailer with capacity of up to 13 t

BMF13T1Pro is a single-beam trailer with capacity of up to 13t and loading area of 2,6m2. This sturdy model has a total length of 6445 mm and total width of 2425 mm. Like other Pro-series trailers, BMF13T1Pro is suitable for professional forestry and can handle rather bulky loads. BMF13T1Pro trailer can be combined with the following forestry crane models: BMF650, BMF720, BMF750(HP), BMF850(HP) and BMF905(HP).

Toughness
Working conditions in the forest are mostly rather extreme and forest machines need to be very tough to withstand the rough terrain and heavy log loads. BMF has been producing forest equipment for about twenty years and has thorough knowledge of manufacturing tough machines. Sturdy frames of BMF trailers are designed according to the distribution of the load and all frames have passed thorough strength analysis. We use high-quality robot welding and locations of all welded seams are strategically placed to ensure resistance to weighty loads. All BMF single-and double beam trailers have strong safety grilles. BMF turning drawbar provides protection to the oil pump that is housed inside the drawbar, and has wider connection points for increased toughness. All other components, such as cables, hoses, support leg cylinders are carefully protected as well to avoid damage and provide longer service intervals. Less service time means more effective operating hours and reduced operating costs.

Functionality
BMF provides drawbars with a number of eye alternatives and two drawbar heights for smooth connection of the trailer. Uniquely designed drawbar can be mechanically locked to a fixed position for driving on the roads. All forestry trailers of BMF range now have EU whole-vehicle type-approval with regard to EU regulation no 167/2013, which confirms that it is allowed to use BMF trailers on public roads in all the EU countries and EU’s neighbouring countries that apply the regulation.
BMF trailers are available with Standard or PRO-type bolsters. Standard option allows to turn the poles inwards to decrease the width of the upper part of the trailer and make manoeuvring and parking easier in narrow areas. PRO version offers the possibility to widen the load area by pulling the poles outwards. The position of PRO bolsters can be changed by sliding them along the beam of the trailer. In addition, the PRO-version bolsters have toothed edges that keep the logs from sliding and turning. In the past, PRO bolsters were used mainly on forwarders, but their advantages have made them popular for tractor-based forestry trailers as well.
To increase the load area and transport more or longer logs, all BMF trailers can be equipped with a frame extension. The maximum length of the frame extension depends on the trailer model. We recommend to add an additional bolster and set of poles to the extension. Extensions for trailer BMF13T1 are available with and without the hydraulic movement option.


Technical data*:

Loading capacity, kg13000
Total length, mm
6445
Length of loading area3985
Total width with standard wheels, mm2425
Wheels550/45-22.5
Chassis 200x200x8 
Axels80x80-8
Loading area, m²2.60
Drawbar cylinders, pcs2
Drawbar angle to sides, ± °30
Clearence mm675
Support legFD

*Technical data is subject to change without prior notice.

Ask for an offer 

Email again: